Liquid Automatic Filling and Sealing Machines: Safeguarding the Production Lifel

Liquid Automatic Filling and Sealing Machines: Safeguarding the Production Lifeline Through Ultimate Cleanliness

For liquid automatic filling and sealing machines, cleaning is far from a simple post-production task; it is a core production step that ensures food safety, maintains equipment precision, and guarantees continuous operation. Particularly in industries with stringent hygiene and safety standards—such as beverages, dairy, and condiments—a rigorous, scientific cleaning system is the absolute lifeline of production.

I. The Three Core Objectives of Cleaning Work

This is the primary mission of cleaning. Residual liquids easily breed microorganisms, becoming a source of contamination for the next batch of products. Thoroughly removing all material residues is fundamental to preventing product spoilage, deterioration, and microbial超標.

Residues such as sugars, proteins, fruit acids, or mineral crystals can corrode and clog precision components like filling valves, flow meters, and sealing elements. This leads to inaccurate filling volumes, imperfect seals, and operational jams, directly impacting equipment efficiency and product qualification rates.

Under strict management systems like GMP and HACCP, the cleaning process itself must be standardized, recorded, and verified to meet audit requirements and achieve full traceability of the production process.

II. Systematic Execution Steps of Cleaning Work

Cleaning operations must follow a standardized operating procedure, typically divided into three stages:

1. Pre-Cleaning and Disassembly After Production:

• Drain residual liquids from pipelines and material tanks.

• Disassemble critical components in direct contact with the product, such as filling heads, pistons, sealing rings, tank covers, and conveyor chain plates. This step is essential to ensure no cleaning死角 remain.

2. Step-by-Step Cleaning and Disinfection/Sterilization:

• Manual Initial Rinse: Transport disassembled parts to a dedicated cleaning area and rinse visible residues with warm water.

• Deep Cleaning:

  • Manual Scrubbing: Use specialized tools and food-grade cleaning agents to thoroughly scrub gaps and internal surfaces of components.

  • CIP (Cleaning-in-Place) Online Cleaning (for complex pipelines): Activate the equipment’s automatic cleaning program, circulating cleaning and disinfecting agents to efficiently flush, dissolve, and sterilize the internal enclosed pipeline system.

• Rinsing and Disinfection: Rinse off all cleaning agent residues with ample clean water (or hot water), then disinfect using approved disinfectants (e.g., peracetic acid, chlorine-based agents) or hot water/steam.

3. Drying, Reassembly, and Inspection:

• Air-dry or blow-dry cleaned components in a clean, dry environment using sterile air to prevent secondary contamination.

• Reassemble parts according to specifications and inspect for proper installation and seal integrity.

• If necessary, conduct a brief循環(huán)沖洗 with a small amount of purified water or the first batch of product before the next production run as a final確認.

III. Key Principles and Documentation

Operators must strictly adhere to hygiene protocols, wear clean work attire, perform hand sanitization, and prevent themselves from becoming contamination sources.

Cleaning tools must be專用 and stored separately from equipment components to prevent cross-use. Cleaning status (e.g., "cleaned," "to be cleaned") must be clearly labeled.

Every cleaning session must be meticulously documented, including time, personnel, cleaning/disinfecting agents used, parameters, and inspection results. Regularly verify cleaning effectiveness through methods such as microbial swab tests.